Forced air draft coolers
In the API world often the โforced air draft coolersโ are plainly referred to as โair blast coolersโ. Air blast coolers are typically used for the higher heat load applications, where cooling water is not available or is hard to come by. Our product categories in the forced air draft cooler range is versatile as well as efficient. It comprises standard commercial air blast coolers as well as customized/engineered air blast coolers. Many years of experience in manufacturing radiators and closed circuit coolers made us to a specialist for your needs.
Features:
Cooling ranges up to 9 KW
Maximum working pressure 100 barg @ -20/200ยฐC.
Anti-static design.
Motor make and type can be easily adapted to suit project specs and/or AVL.
Available at request:
Cooling capacities over 9 KW.
Zone 1 or 2 ATEX certification.
Advantages
Low head designs for maximum seal liquid circulation.ย
Full contact laser welded fins enhance the heat transfer for optimal cooler efficiency.
The 316Ti full contact laser welded fins suit offshore applications without compromise.ย ย ย
For best cooler efficiency Flopac designs use cooler tubes in series, rather than parallel.ย
Flopac cooler designs eliminate laminar flow patterns that are fatal to cooler efficiency.ย
API 682 – Forced Air Coolers
CFA-400
seal cooling by forced air blasting
Capacities up to 5 KW, 69 barg @ 120oC, ATEX certified
API 682 – Forced Air Coolers
CFA-700
seal cooling by forced air blasting
Capacities up to 9 KW, 69 barg @ 120oC, ATEX certified
API 682 – Forced Air Coolers
CFA-400
seal cooling by forced air blasting
Capacities up to 5 KW, 69 barg @ 120oC, ATEX certified
API 682 – Forced Air Coolers
CFA-700
seal cooling by forced air blasting
Capacities up to 9 KW, 69 barg @ 120oC, ATEX certified
Contact us
Address
Westelijke Havendijk 15
4703 KW Roosendaal
The Netherlands
Phone
+31 (0)165 593 170